Strippy Curves

This week it's Kim's turn to share her scrap bag sampler block with us. She's gone with strippy curves. This block did frighten me to start with but it's not as complicated as it looks and is so effective. I've posted my block at the end of this post and on IG, remember to share your blocks with the #scrapbagsampler hashtag
Over to Kim :-

STRIPPY CURVES WITH @getahashtagkim

Don’t be scared, curves aren’t as tricky as you think! Try this easy, no-pin way of making gentle improv curves. The Scrap Bag Sampler SAL is the perfect opportunity to give it a go, as we’re using scraps and making random blocks. 

Cut four 9½ x 2½ inch strips then lay them in your chosen order.

Then take two strips and overlap them by about an inch as shown with pin markers.

Using a small rotary cutter, cut through both layers where they overlap, making small curves. Go slowly to avoid shifting the two strips, pin them together at the far end if it helps.

Discard the narrow scraps & admire your hills & valleys! Cut and sew each pair of strips one at a time to ensure the curves match. Those straight sides in the middle will be cut and sewn later. 

Take one pair & sew along the curvy edge RIGHT SIDES TOGETHER using a narrow seam allowance, 1/8th inch is easier than trying for a normal ¼ inch, in my experience. You don’t need pins, trust me! Just go slowly, carefully lifting & turning the top layer as you go to align the edge with that of the bottom layer. Don’t pull or you’ll stretch the fabric. You may only manage a couple of stitches at a time before you have to leave the needle down & raise the foot to work around the curves and wriggle the fabrics but it WILL work. It’s trickier to explain than it is to actually do!

Yes, I know it looks a mess right now but it will press flat, if you go slowly. Lay one strip flat on the ironing board, hold the other one up and gently nudge the tip over the iron along the seam allowance to press it over to one side.





Overlap then cut the remaining straight sides as shown earlier. Sew & press as before. Give the block a final press, with a blast of steam, then trim to a 4½ x 8½ inch block.
Looking forward to seeing your curves !!!

Here's my finished block, I think I might make a few more to fit them in my bag, they feel like waves to me rather than hills and valleys.

Visit our designers on Instagram to see their versions of this block : @cotefleurie @getahashtagkim @JustSewSue @lisasew @metroquilter @picosailors @pippaspatch @quirkyhannah  @surfseasew @therunninghare

Check out #scrapbagsampler and come back next week for Block 3