Foundation pieced flying geese

It's our official start for the Scrap bag Sampler today, our first block is  Dip your toes into foundation piecing with this strip of flying geese designed by @justsewsue 

If you are a beginner, foundation piecing is a bit like marmite, you will either love it or hate it, however the opportunities for making amazing quilts with foundation piecing is limitless

Over to Sue :- 

Foundation pieced flying geese

 Materials:

2.5” to 3” squares of background fabric cut into triangles

Assorted scraps for geese measuring at least 2.5” by 4.5” but don’t cut your pieces down to this size as you will trim as you go

Foundation paper

Download the foundation pattern here. Print the foundation pattern onto paper. I use Jenny Doak’s foundation paper which I buy from Amazon. I buy the cheapest size and print in greyscale at actual size. Measure the 1” box before continuing. I then mark on the paper the colour fabric that I want for each goose. Don’t use a Frixion pen as you will lose the markings when you press your work.

 Then cut apart the paper patterns leaving a good quarter inch around the dark cutting line.

You are ready to start sewing. The first section is potentially the trickiest but after that you just follow the numbers.

Take your first geese fabric and place it on the wrong side of the foundation pattern, face up. Pin on the right side parallel to the stitching line between A1 and A2. Fold back the foundation along the stitching line between A1 and A2. Trim the fabric ¼” away from the line of the paper.

Place a background triangle of fabric face down on your geese fabric, matching the edge of the background triangle to the geese triangle.  Keeping a firm hold of the fabric, turn over and pin perpendicular to the line between A1 and A2.

Turn your stitch length down to 1.6 as the paper will be perforated and much easier to remove. Stitch along the line between A1 and A2. Starting in the seam allowance and continuing into piece A4. Press the fabric away from A1 and double check the darker fabric isn’t showing in the background. If it is, this is the time to grade the seam by trimming the seam allowance of the darker fabric.

Now it’s time to repeat your actions for piece A3. Remember the mantra – trim, stitch, press, repeat.

Fold the paper back on the line between A1 and A3. You may tear some of the paper, but don’t worry that will make the removal of the paper easier. If you rip too hard, use a scrap of foundation paper and a glue stick to repair the tear, don’t use sticky tape, it won’t end well!! Trim the fabric ¼” away from the line of the paper. Place a background triangle of fabric face down on your geese fabric, matching the edge of the background triangle to the geese triangle.  Keeping a firm hold of the fabric, turn over and pin perpendicular to the line between A1 and A2.

Stitch along the line between A1 and A3. Starting in the seam allowance and continuing into piece A4. Press the fabric away from A1 and double check the darker fabric isn’t showing in the background. 

Instead of pressing you can use a wallpaper seam roller but definitely press with an iron once the unit is completed. Repeat the sequence – trim, stitch, press, repeat until you have sewn all twelve sections. This is a good leader and ender project.

Press the finished block and trim to 4½ x 2½ inches. Sometimes the paper shrinks slightly when pressing, so just make sure you cut to the correct size.

Wait to sew sections together until you have a better idea of what size you need, but this block would look great as a rainbow.

I've only had time to make a small block, I'm possibly going to need more as fillers for my bag pattern. It had to have some sparkles didn't it.

Visit our other designers to see their blocks on Instagram 

@cotefleurie @getahashtagkim @lisasew @metroquilter @picosailors @quirkyhannah   @surfseasew @therunninghare

If you're joining in, please use hashtag #scrapbagsampler on Instagram or email me photo's,

Next week it's Kim's block, so check back in next Friday.